Welcome to Bradshaw Australia

Bradshaw Australia

HENNA Queen Copper Plated bed
  • Dimensions: W2220mm x D1670mm x H1050mm
  • Status:
    Good stock
  • The HENNA copper plated bed is a beautifully crafted, yet minimalistic piece of bedroom furniture.
  • With its subtle titian-copper plated finish, this bed oozes charm with a contemporary feel
  • The bed is supplied with headboard and matching side rails & solid laminated slats.
  • Centre support rail and adjustable feet are included with the bed (not shown in the images)
  • Slats are laminated plywood and strapped. There are 4-6 fixing points on the side rails that hold the slats in position

  • Please note the tone/shade of the copper on this bed is slightly lighter than on our KOPPAR range of mirrored/copper products. However, we still suggest that the bed would compliment the KOPPAR range of products in a suite setting
  • SKU 314
    Country of Manufacture China
    Product Care
    • Use a good quality furniture polish with a clean micro fibre cloth. Ensure no swarf is on the cloth or this may scratch the surface.  Spray cleaner onto the cloth and never directly onto the product. We also recommend a slightly damp (not wet) cloth to wipe down. This must be dried using a non wet cloth afterwards. 
    • Avoid contact with sharp objects
    • Avoid hard physical impact
    • Avoid continuous rubbing/contact with objects
    • Avoid sustained contact with water, damp, moisture and heat
    • Avoid contact with thinners, turpentine, or other liquids such as nail polish remover
    • Never use abbrasives, thinners, corrosives, solvents or powder based cleaning agents to clean your furniture
    • Item must not be subjected to excessive humidity, and is not recommended to be used in a bathroom, or any room with excess moisture
    • Item must not be subjected to salt water (this includes in the air) environments, as this may lead to corrosion. 
    Bed Size Queen Size
    Height 1050mm
    Width 1670mm
    Length / Depth 2220mm
    Headboard Height 1050mm
    Footboard Height No
    Color Copper
    Material Copper Plated
    Product Weight 47kg
    Packed CBM 0.224
    Packed Casegood Dimensions No
    Packed Carton Dimensions/Weight - HEADBOARD ONLY No
    Packed Carton Dimensions/Weight FOOTBOARD ONLY No
    Packed Carton Dimensions/Weight HMF 1660mm x 1140mm x 100mm - 20.1kg
    Packed Carton Dimensions/Weight SIDE RAILS & SLATS No
    Packed Carton Dimensions/Weight SIDE RAILS 2130mm x 135mm x 100mm - 15kg
    Packed Carton Dimensions/Weight SLATS 1580mm x 135mm x 70mm - 15kg
    Slat Material Timber
    Floor - Underside Side Rail Height 27cm (Height from floor to top of the slats is: 30.3cm)
    Extension Kit Packed Carton Size No